Accurate measurements are crucial to ensure your custom roller and vertical blinds fit perfectly. Follow this comprehensive guide to measure your windows correctly.​

General Guidelines:

  • Tools Needed:
    • Steel measuring tape
    • Pen or pencil​
    • Notepad or measurement worksheet​
  • Measurement Tips:
    • Always use a steel measuring tape for precision.​
    • Measure to the nearest millimeter.​
    • Measure each window individually, even if they appear identical.​
    • Width (W) is measured horizontally; Drop (D) is measured vertically.

Mounting Options:

  1. Inside Mount (Recess Fit):
    • Blinds are installed within the window frame, offering a neat, built-in look.​
    • Considerations:
      • Ensure the window recess has sufficient depth to accommodate the blind.You will need 60 mm for a single roller blind and 100 mm for a double roller blind.
      • Be aware of any window handles or obstructions.
  1. Outside Mount (Face Fit):
    • Blinds are mounted on the wall or window frame, covering the entire window area.​
    • Considerations:
      • Ideal for shallow window frames or to minimize light gaps.
      • Provides full coverage, enhancing privacy and light control.

Measuring for Roller Blinds:

Inside Mount:

  1. Width (W):
    • Measure the width inside the window recess at the top, middle, and bottom.​
    • Record the narrowest measurement to ensure the blind fits within the recess.​
  2. Drop (D):
    • Measure the height from the top of the recess to the window sill on the left, center, and right.
    • Record the longest measurement to ensure full coverage.

Outside Mount:

  1. Width (W):
    • Decide how much overlap you’d like on each side of the window (typically 50-100mm).
    • Measure the total width, including the desired overlap.​
  2. Drop (D):
    • Measure from the top of where you want the blind to start (above the window frame) to where you want it to end (below the sill or to the floor).​

Additional Tips:

Depth Clearance: Ensure there’s enough depth within the window recess for an inside mount. Check the specific product requirements for exact measurements.​
homedepot.com

Obstructions: Account for any handles, locks, or other protrusions that might interfere with the blind’s operation.​

Consistency: Always measure width first (W) followed by drop (D) and provide measurements in this order when ordering.​